LSRA24
Can't find what you're looking for? Go to the Product Selector
Shaft Support, Continuous Support Assembly, Low Profile, Predrilled, Class L, Steel, Cut To Length, Use with 1.5 in Nominal Diameter Open Bushing Bearings
Lead Time:
Contact Factory
- Shaft supports simplify mounting of Thomson 60 Case shafts. Users of Thomson 60 Case shafting should consider the use of these shaft supports
- These supports can be used horizontally or vertically.
- Low Shaft Rails allow the design of more compact linear motion systems
- Class L 60 Case Shaft included
- Y1=Y2 is standard. Special Y1 can be specified by customer.
- Bolt down from top
- Consists of black oxide steel rail and high carbon steel LinearRace shafting (HRC 60 min.).
- LSRAs do not use standard “PD” shafting. The shafting uses a different hole pattern and configuration
- Use only with Super Smart Ball bushing bearings.
| Wymiar | Wartość |
|---|---|
| [d] Shaft, Nominal Diameter | 1.5 in |
| [A] | 0.93 in |
| [A1] | 0.465 in |
| [A2] | 0.69 in |
| [H] | 1.375 in |
| [H] Tolerance | ± 0.002 in |
| [H1] | 0.7 in |
| [N] | 0.390 thru, 0.601 Dia C-Bore x 0.580 Deep |
| [X] Dim | 4 in |
| [Y] | 2 in |
| Recomended Bolt | 3/8 |
