Thomson Linear Motion Optmized
Thomson is a global company with locations all over the world. Since 1936, Thomson has been one of the forerunners in the motion technology industry. Our inventions and products have been supplying optimized motion solutions to a broad range of companies and application areas.
Since 1946, Thomson has set the standard for linear motion components, delivering solutions to countless markets and application. Headquartered in Wood Dale, Illinois, USA, the company manufactures linear bearings & guides; electric linear actuators, ball and lead screws; ball splines; linear motion systems; precision balls; stepper motor linear actuators; and screw jacks.
Based in Fremont, California, USA, Thomson BSA has engineered and manufactured lead screws, ball screws and actuators since 1971.
Founded in 1961, Thomson Neff has engineered and manufactured ball screws, linear bearings and shafting from its facility in Wolfschlugen, Germany.
Since 1982, Thomson Tollo has engineered and manufactured linear actuators, linear motion systems and precision linear actuators out of its Kristianstad, Sweden, facility.
Founded in 1947 and part of the Thomson business since 2007, API Delevan is a specialty manufacturer of coil winding technologies headquartered in East Aurora, New York. https://www.delevan.com/web/index2.html
Based in Cleveland, Ohio, USA, Nook Industries was founded in 1969 and was integrated into the Thomson business in 2021. The company manufactures screw jacks, electric cylinders, modular linear actuators, precision screws and linear guidance solutions. https://www.nookindustries.com
An industry leading brand for more than 50 years, Harowe resolvers are manufactured by API Delevan in East Aurora, New York. https://www.delevan.com/web/Resolvers/Resolvers.html
"With the Thomson actuators, we have reduced installation time by about 75 percent, and we don't need band parents searching for hydraulic leaks from fittings during startup."
— Drew Taylor, Co-Founder,
Clubhouse Trailer Company
"Load capacity is a key differentiator for cobots. Ball screws enable handling of higher loads than gears, and the Thomson ball screws had the highest load capacity of those we evaluated."
— Yvan M. Measson,
CEO, ISYBOT
"The way that Thomson has designed the components on this is really slick. They get the cost down by keeping components to a minimum. Using a motor with an integrated lead screw instead of a ball screw cuts the cost of coupling screw and motor together and all the support hardware that goes along with that."
— TJ Merry, Production Manager,
Bend-Tech
"The Thomson quick mounting technology helps us do things modularly. We assemble the machines in our shop, then remove our shutters and curtains and put them all in the trailer with the rails and deliver to the customer. We reassemble everything there after installing rails. It’s just six pieces going back together."
— Mark Abel, Engineer,
U.S. Autocure
"We needed to have the strength to move load-carrying walls easily and the intelligence to be able to do so on demand. The Thomson technology provided the robustness we needed and the built-in electronics and communications that enabled them to participate in the home network at the right level of energy consumption. A smaller unit would not have done the job, and a bigger one would have added unnecessary cost and energy consumption."
— Joe Wheeler,
Architecture Professor,
Virginia Tech University
"The Thomson virtual design session helped narrow our choices to determine exactly what product we needed to meet our design specifications. The online tool was easy to use and got us going, while Kyle Thompson, Innovation Manager at Thomson, was instrumental in helping us customize and optimize our motion. The way in which they helped us solve the anti-rotational issues is a great example of why it helps to have consultation with a motion design expert."
— Connor McCallum,
engineering student,
University of Waterloo
"We developed the software that we embed in the system. Integrating this with our sensor architecture enables us to compute the motions that need to be done and tells the actuators what to do. Our PC sends messages through Ethernet, then Ethernet signal CAN converters relay those messages to the actuators. The Thomson smart actuators provide all this capability plus exact feedback on their position along their stroke. With a hydraulic actuator, we would have to add that."
— Eric Cabrol,
Head of Robot Engineering,
Stanley Robotic
"I knew I made the right decision to work at Thomson when my work colleagues started to become my most trusted and best friends. I'm fortunate to be able to say that trend has continued throughout my 40 years working here."
"Thomson is open to change, and all of the improvement techniques, the whole culture, really comes from the top and works its way down to the ground level of the organization. So there is total coherence there, and they are ready to change."
"At Thomson, I am surrounded by highly driven and successful people who genuinely care about our customers as well as the people they work with. We love continuous improvement, so even after 19 years with the company, I am still able to learn something new every day."
"I've worked in a variety of departments at Thomson, and what I've noticed that makes Thomson truly unique is a sense of family. Some of my closest friends to this day are current or former Thomson employees. It really has been a special company to work for."
"Working at Thomson is, for me, like living in a house with doors open to the world. That means that Thomson not only connects technologies, but also people and cultures."
"I am so happy to work at Thomson. Here I make my most trusted and best friends, and working with everyone to make our team better fills us with pride. We enjoy the moments of success through our joint efforts."